General product specifications

This two-component primer is based on epoxy resin and polyamine hardener and contains various anti-corrosion pigments and is hardened with polyamide hardener.

Product feature

Excellent resistance to moisture, chemicals and acidic and alkaline environment, excellent adhesion to clean metal surface, excellent resistance to corrosion and one of the important features of their quick drying is this product in epoxy and polyurethane paint systems and in environments with Low and medium corrosiveness is used. It is used as a single layer in indoor closed environments.

Uses

This color is used as a very suitable lining layer for water pump house equipment, pipelines and water transmission, equipment submerged in fresh water, concrete and metal tanks containing water and all metal structures in coastal and off shore areas.

Equipment required for implementation

• The following devices can be used to apply this color
• Spray with air: CONVENTIONAL SPRAY (pressure 3-4 atmospheres) (nozzle opening 1.8-1.6 mm) from a 2 or 2.2 mm nozzle
• Spray without air: SPRAY AIRLESS (pressure 6-7 atmospheres) from the nozzle 660/.or 482/.mm
• roller
• Brush (for small surfaces) – electric or air mixer

Surface preparation

The target surface should be cleaned from any pollution such as dust, oil, grease, etc. and the target surface should be sandblasted according to the Swedish standard 8501-1iso 2.1/2, SA up to 3 SA cleanliness. The required profile for this primer is 50/75 microns

Weather conditions, time of implementation and method of use

First, mix the two components A and B separately, then add the hardener (component B) to the paint (component A) according to the mixing percentage mentioned on the label and mix until the channel is uniform. After 20 minutes, allow the mixture to react between Do two parts according to the type of spraying, add thinner to it and mix it until it is uniform and ready to use. According to the useful life after mixing, you should mix the amount of color that can be consumed in this period of time. The ambient temperature should be between 10 and 40 degrees and the surface temperature during painting should be at least 3 degrees Celsius above the dew point and the air humidity should be at most 80%, and the surface should be free of ice and moisture. After finishing the work, wash all the equipment with a suitable thinner

safety tips

This product is highly flammable and should be kept away from sparks and flames. Due to the harmfulness of continuous inhalation of the solvent vapors of this product, it is necessary to use glasses and masks in closed spaces, as well as ventilation during the painting time. In case of contact with skin and eyes, wash with plenty of water and consult a doctor