General product specifications

This product is an epoxy floor top color and this color is produced and supplied as a floor top color based on epoxy resin without solvent and polyamine hardener along with resistant and suitable pigments.

Product feature

Good resistance to moisture and water and corrosive factors – Good resistance to oil – Excellent resistance to wear – Good mechanical resistance Easy to perform, uniform and without seams

Uses

This color is used as an intermediate color for covering concrete floors or cement surfaces in factories and offices, food production halls, laboratories, hospitals, and also when resistance to solvents, chemical and mechanical substances is needed.

Equipment required for implementation

The following devices can be used to apply this color

• Special spatula (SQUEEGEE)
• roller

Surface preparation

The desired surface should be cleaned from any contamination such as dust, oil, grease, etc

How to use

First, mix the two components separately and then add the hardener (component B) to the color (component A) according to the mixing percentage mentioned on the label and mix until the channel is uniform and ready to use. According to the useful life after mixing, you should mix the amount of color that can be consumed in this period of time. – The ambient temperature for coloring should be 10-40 degrees Celsius. The temperature of the surface during painting should be at least 3 degrees Celsius above the dew point and the air humidity should be at least 80%, and the surface should be free of ice and moisture. After finishing the work, wash all the equipment with a suitable thinner

safety tips

This product is highly flammable and should be kept away from sparks and flames. Due to the harmfulness of continuous inhalation of the solvent vapors of this product, it is necessary to use glasses and masks in closed spaces, as well as ventilation during the painting time. In case of contact with skin and eyes, wash with plenty of water and consult a doctor